QS-812 Refills: Confirm the Ink and Access Method

Nov 10, 2026 | Industry Trends

QS-812 Refills: Confirm the Ink and Access Method

For a QS-812 refill enquiry, first ask whether the exact offered version supports refilling. Then request the supplier-approved ink identity and the product-specific access, filling and reassembly instructions. Keep those confirmations together before ordering a refill consumable. The word REFILL on catalogue barrel images is a useful question reference, but it does not provide a complete refill specification or operating method.
Official QS-812 composition includes REFILL wording on the barrel. The open tip and drawn stroke do not identify the refill ink, access mechanism or filling procedure.
Ask about the offered version behind REFILL
Jinsida Stationery’s QS-812 page identifies a whiteboard marker and lists PP, black, red, blue and green colour options, and dimensions of 125 × 18.5 mm. The gallery shows REFILL printed near the lower barrel area, with a small arrow.
The reviewed product text does not name a refill ink or describe the access method. For buyers sourcing wholesale whiteboard markers, the practical next step is a supplier response tied to the exact pen being quoted. Ask it to explain what the printed wording means for that version rather than assuming every similar barrel uses the same arrangement.
Specify the ink by identity rather than appearance
If refilling is supported, request the supplier’s approved refill product name or code and the marker versions it covers. Identify the required colour through that refill reference. A black ink bottle and a black marker cap do not, by themselves, establish an approved combination.
The catalogue describes the marker ink as water-based, but that broad description is not a specific refill order code. Ask whether the supplier offers the applicable consumable or identifies another supported source. Keep any offered ink container and dispensing arrangement linked to the same instructions, without assuming that a general-purpose ink is suitable.
Refill enquiry field
Supplier confirmation
Pen version
Whether the offered QS-812 supports refilling
Ink identity
Approved product code and applicable colour
Access method
Actual product-specific instructions
Filling guidance
Supplier’s amount or completion criterion and conditions
After filling
Reassembly and any instructed readiness checks
Official capped-marker and carton presentation. Barrel markings identify the enquiry; the pictured carton does not confirm an included refill bottle or an approved consumable.
Request the real access and filling sequence
Ask the supplier to identify the intended refill access point on a labelled product reference and provide the complete sequence for the offered pen. The printed arrow does not explain which parts are intended to move or how the user should handle them. Leave those details for the supplier’s actual instructions.
Request the filling guidance associated with that sequence, including the supplier’s stated quantity or completion criterion where applicable. The published 3 g ink-weight field is not identified as a refill dose. Keep it in its original catalogue scope and ask for the relevant refill guidance separately.
Also obtain the instructions for restoring the supplied configuration and determining readiness afterward. Do not combine an access description for one version with filling guidance from another. If any part remains unclear, ask for the missing explanation before treating the procedure as complete.
Bind the demonstration to both pen and ink
Request a continuous supplier demonstration identifying the QS-812 sample and the proposed refill consumable at the start. The explanation should correspond to the written instructions, including the relevant starting condition and the supplier-defined completion and readiness points. Keep the ink label or code associated with the recording.
A demonstration with an unidentified bottle leaves the purchasing team unable to order the same consumable. Likewise, a completed stroke alone does not explain the access or filling steps. Record what the supplier actually identifies and demonstrates, and list any remaining question instead of extending the result to every pen or ink.
Before accepting the response, check that a colleague can match the pen version, refill label and instruction revision without interpreting the photograph. Mark a missing ink code, unclear access explanation or incomplete readiness instruction as a specific open item. Request a corrected response against that item rather than approving the entire refill arrangement through a general confirmation.
Another official product composition shows capped and uncapped pens. It is a catalogue reference, not a refill demonstration, disassembly guide or verified compatibility result.
Keep consumable supply separate from the pen offer
Ask whether any refill consumable is included, offered separately or outside the quotation. If an ink product is proposed, give it a distinct item description linked to the supported pen version. Keep the supplier’s current instructions with that item so receiving and purchasing staff can identify the intended combination.
For a repeat consumable order, retain the accepted ink code and the marker reference. Ask the supplier to identify a changed ink, container or pen configuration before applying the earlier instruction. A similar label or unchanged colour name should not silently replace the identified combination.
Confirm refill support for the offered pen version.
Identify the supplier-approved ink and relevant colour.
Obtain the actual access, filling and reassembly instructions.
Keep the identified demonstration and supply status with the quotation.
No refill has been performed or verified here. Catalogue ink, safety, environmental and writing descriptions do not establish universal compatibility, refill performance or a usable procedure. Send the specific pen and consumable questions through the supplier contact page before adopting a method or specification.
QS-812 refill FAQ
Does REFILL identify a compatible ink? It does not name one in the reviewed images. Request the supplier-approved refill identity for the offered marker.
Is 3 g the instructed refill amount? The page labels it ink weight, not a refill dose. Ask for the actual filling guidance.
What should the supplier demonstrate? An identified pen and refill product following the matching instructions, with access, filling, reassembly and stated readiness clearly explained.
Whiteboard MarkersRefill EnquiriesB2B Purchasing

Get a Free Quote

Fill in the form and we'll get back to you within 24 hours.